A hydraulic brake actuator is a unit which changes hydraulic pressure or any other kind of energy into a force, which can be used for applying a brake in any vehicle.
A hydraulic brake actuator that is utilized in the braking system of a vehicle make use of a push rod for quick and easy positioning of the rod with regard to the piston that can slide into the bottom of the master cylinder. Without any pressure, the push rod of the actuator is cleared from the piston, for ensuring total return of the piston.
Nowadays, air hydraulic brake actuator is used in braking mechanism of a vehicle, especially in heavy good vehicles. These vehicles generally utilize compressed air, which comes from a compressor driven by an engine, for actuating the braking mechanism. This category of application calls for a brake actuator that comprise of a master cylinder. Another kind of brake actuator is the electric hydraulic brake actuator. In these, the brake liquid pressure is in proportion to the controller signal of the electronic brake.
When a driver pushes the brake of a vehicle using hydraulic brake actuator, the master cylinder starts to move. This in turn triggers off the brake actuator that force down the brake pad alongside the wheel. This will result into slowing down of the car. A very good attribute of hydraulic brake actuator is that these are capable of taking larger loads in comparison to the conventional electric motors. Because of this reason, these actuators are widely utilized in construction vehicles, automobiles, and even aircraft. This makes the brake mechanism safe and sound.
A hydraulic brake actuator comprising of a piston that can glide into a cylinder meant for hydraulic brake operation, is also incorporated with motorized linkage. This linkage is used for the handbrake application. This mechanical linkage consists of a cranked shaft that is attached to the clogged end wall of a cylinder and a linearly moveable hook. It also comes with a strut that connects a hook and the cranked shaft, which leads to linear disarticulation of the hook. The cranked portion of a shaft, belonging to the hook and the strut, are mostly enclosed inside a hydraulic working slot, which is defined by the cylinder and the piston. This make sure, that when somebody apply the handbrake and the service brake at the same time, there is no modification in the volume of that hydraulic slot because of any movement of motorized components. This will also make certain that existing hydraulic liquid pressure will not have any impact on such kind of movement.
A hydraulic brake actuator is also useful for towing vehicles, as with this type of brake system, there will be no requirement of separate brake connections or controls. This class of actuator applies the brakes of the trailer instantly with relative force when someone applies the brakes. Another good thing about these actuators is that it is quite easy to install these actuators and operating them is also pretty simple. These actuators also offer a breakaway protection. To install a hydraulic brake actuator, you will need a line kit. This kind of hydraulic brake line kit comes with a complete set of all the needed lines, hoses, tee fittings, clips, and brackets. All these elements are required for installing brake actuators.
© 2016 hydraulicactuator.net